WE DECIDED TO WORK WITH ONE OF THE FENDER PLUGS AVAILABLE FROM B'COOL PRODUCTS, (CANADIAN COMPANY!!) THESE ARE GREAT TO WORK WITH AS YOU CAN CUT THEM ANYWAY YOU WANT AND IT ALSO MAKES YOU BIKE VERY UNIQUE.
WITH THE CENTER CUT OUT TO THE ROUGH SHAPE WE WANT IT IS TIME TO FIT IT AND MARK OUT WHAT WE WANT TO REMOVE TO MAKE IT THE WAY WE WANT .
HERE IT IS CUT AND TACKED INTO PLACE AND ROUGHLY WHAT WE WANT. THERE ARE MANY MORE THINGS TO DO ...TRIMMING....MAKING SURE THAT WE HAVE THE CHAIN GAURD MOUNTS IN PLACE AND FITTING AND REAR SIGNAL LIGHTS AND LICENCE PLATE AND BRAKE LIGHTS TO GO YET. BUT THIS IS STAGE 1 AND THE FENDER IS WHAT WE ARE LOOKING FOR.
WE ALWAYS LIKE TO DO SOME WORK TO THE TANK. BECAUSE OF THE SHAPE AND STYLE OF THE TANK WE CHOSE NOT TO STRETCH IT ANY BUT IT IS A MUST THAT IS IS COVERED IN ON THE BOTTOM. YOU CAN SEE TWO SMALL HOLES WITH GROMMETS ON THEM ON THE FROMT OF THE TANK. THESE ARE FOR THE THROTTLE AND IDLE CABLES TO GO THROUGH. THERE IS A MATCHING SET JUST ABOVE THE CARB ARE FOR THEM TO COME OUT. SMALL TOUCHS.....BUT COOL WHEN THEY ARE DONE .
